FIRSTINFO Upgraded Pneumatic/Manual 15 Liter Oil/Fluid Changer Vacuum Extractor Pump w/Hose Storage + 3.5 x 4.5 mm Engine Oil Hose + Dust Cover

Buy 1 get 1 FIRSTINFO Upgraded Pneumatic/Manual 15 Liter Oil/Fluid Changer Vacuum Extractor Pump w/Hose Storage + 3.5 x 4.5 mm Engine Oil Hose + Dust Cover Simple review

So you can check out the other reviews at Amazon.com

only with $ 123.99

• 【Replacing Hose Available & Hose Storage w/ Sealing Cap】-- With the storage hose to collect oil hoses easily after using, and sealing cap to avoid any dust and dirt, and also can prevent the liquid from spillage during transport. The hoses can be purchased individually.
• 【Dual-Mode】--FIRSTINFO 15L Oil Extractor Pump is suitable for big cars equipped with large engines. The pneumatic mode for higher speed of oil change. Manual mode requires no other equipment; easy to do the oil / fluid changing for DIY. No need to lift up or crawl under the car to drain out the oil.
• 【Speedy Extraction】--Fast suction and extraction speed of 1.6~1.8L /min.. Extracts engine oil in a 4-cylinder car within few minutes in pneumatic mode. And leaves no mess to clean afterward.
• 【No Oil Left】--With 4 sizes of tubes which can go into the bottom of oil pan. Nylon oil hoses B: 7.8x9.8mm X 1M C:5.3x6.7mm X 1M D:4x6mm X 1M E:3.5x4.5mm X1M; B hose can be connected to (C,D or E ) hose and it will extend to 2 Meter length. To reach the very bottom of the reservoir and suck up the fluid.
• 【No Limit】-- No limit to any places; perfect for working on vehicles anytime and anywhere, and for aquarium. To extract the engine oil, brake fluid, ATF fluid and other fluid of motorcycles, vehicles, lawn mower, boat, jet ski etc. *Note: Gasoline, and fluid with high volatility, high corrosion, high alkalinity or acidity, high temperature are FORBIDDEN to be used with this extractor.

› See more product details

---

Product Description

FIRSTINFO Auto Fluid Changer Pump Series

FIRSTINFO Upgraded 15 Liter Pneumatic Oil Extractor/Vacuum Pump Manual Fluid Extractor

Exclusive Features

Upgraded Storage Design The sealing cover cap allows you to transport the full unit everywhere without spillage. Hose storage unit collects the tubes together to keep the tubes and your garage clean. Also ensures no more missing tubes.	Safety Lock The safety lock design seals the spout securely, ensuring safe operation.	Noise Reduction Nut Reduce the noise and release the excessive pressure automatically. Pressure balance design provides more safety when using.	Patented Products Please identify FIRSTINFO Manual/Pneumatic Oil extractor Pump-- with patent authentication. US Patent Number: 8360741

Read more

Excellent Design

Extension Tube to Reach The Bottom Oil Pan Suck up all drop of fluid in the bottom of it by attaching the extension tube to the main hose (B: Ø 7.8 x 9.8 mm). Make sure the tubes are all connected tightly.	Extra Ø3.5 x 4.5mm Thinnest Tube 3.5 x 4.5 mm Exclusive Designed for the needs of extracting oil through the small dipstick tubes. Connect with the main hose (B: Ø 7.8 x 9.8 mm). to reach bottom of your oil pan.	Spout The eagle mouth designed spout makes it fluent to pour and prevents spilling out. Do Not extract oil over the limit line on the oil extractor to prevent overflow.	Air Control Valve for Easily Operation Easy to operate the air control vale to open or close the air supply. Please close the air inlet valve while operating in manual mode.

Read more

Step 1. Install The Tube Before Extraction

• Connect the main hose (B: Ø 7.8 x 9.8 mm) counterclockwise with the oil extractor.
• Choose an extension nylon tube with suitable diameter to attach to the main hose.
• Please make sure they are all connected tightly. To suck up every drop of oil down to the bottom of the reservoir.

Attention

• Cool down the engine at least 15 minutes after driving. If the car was not used in the last 4 hours, warm it up for at least 3 minutes before extraction.

Step 2. Start To Extract Oil / Two Way Mode To Fit Any Condition

• Remove the oil dipstick and insert the connected tube into the dipstick pipe until it reaches the bottom of the oil pan.
• Connect the extractor to air compressor and turn it on. The pneumatic action provides higher speed. Set the operating pressure between 40-170 psi.
• Start pumping manually. The manual action requires no other equipment to work with.
• Pattern designed handle provides more stability for the use.

Step 3. Uninstall The Tube After Extraction

• Press the decompression valve to release the negative pressure.
• Remove the hose clockwise.

Step 4. Pour Out The Oil / Why Is The Extractor Leaking From Bottom?

• Pour out the old fluid out in the recycling station.
• There is a limit line on the tank. If the fluid goes over the limit line, it might flow into the vacuum chamber and cause leaking from bottom.
• Noted that the fluid should NOT be over the limit line while pouring.

Installation

Extraction

Uninstall

Pouring and Cautions

	FIRSTINFO Pneumatic / Manual 6.5L Oil Extractor + Brake Bleeding Hose	FIRSTINFO Pneumatic / Manual 6.5L Oil Extractor	FIRSTINFO Pneumatic / Manual 10L Oil Extractor + Brake Bleeding Hose	FIRSTINFO Pneumatic / Manual 10L Oil Extractor	FIRSTINFO Pneumatic / Manual 15L Oil Extractor + Brake Bleeding Hose	FIRSTINFO Pneumatic / Manual 15L Oil Extractor
Capacity	6.5 L	6.5 L	10 L	10 L	15 L	15 L
B Tube ( 7.8 x 9.8 mm, 39.3 Inch )	✓	✓	✓	✓	✓	✓
C Tube ( 5.3 x 6.7 mm, 39.3 Inch )	✓	✓	✓	✓	✓	✓
D Tube + Wire ( 4.0 x 6.0 mm, 39.3 Inch )	✓	✓	✓	✓	✓	✓
E Tube ( 3.5 x 4.5 mm, 39.3 Inch, Can Fit Most Vehicles)	✓	✓	✓	✓	✓	✓
Brake Bleeding Hose ( Can Fit Most Standard And ABS Brake Systems )	✓		✓		✓
Hose Storage ( Keep Your Hoses Well Stored )	✓	✓	✓	✓	✓	✓
Dust-Proof Cover ( Avoid Spillage And Dust)	✓	✓	✓	✓	✓	✓
Operation Mode	Manual / Pneumatic	Manual / Pneumatic	Manual / Pneumatic	Manual / Pneumatic	Manual / Pneumatic	Manual / Pneumatic

	FIRSTINFO One Way Check Valve 6.5 feet (2 Meter) Automotive Brake Bleeding Hose	FIRSTINFO Dia. 7.8 x 9.8 mm Nylon Tube Main Oil Hose with 39.3 Inch	FIRSTINFO 5.3 x 6.7 mm Nylon Tube Oil Hose with 39.3 Inch Long	FIRSTINFO 4.0 x 6.0 mm Nylon Tube Oil Hose with 39.3 Inch Long	FIRSTINFO 3.5 x 4.5 mm Nylon Tube Oil Hose with 39.3 Inch Long
SKU	A1106G	A1106B	A1104C	A1106D	A1104A
Type	Brake Bleeding Hose with Non-Return Check Valve	Extractor Main Hose	Extension Nylon Tube	Extension Nylon Tube	Extension Nylon Tube
Specification	4.0 x 8.0 mm	7.8 x 9.8 mm	5.3 x 6.7 mm	4.0 x 6.0 mm	3.5 x 4.5 mm
Length	78.6 inch	39.3 inch	39.3 inch	39.3 inch	39.3 inch

If you want to buy them , please visit here :

----------------------------

Hey my bro, Many thanks for visiting our Website. Are you currently trying to find facts about FIRSTINFO Upgraded Pneumatic/Manual 15 Liter Oil/Fluid Changer Vacuum Extractor Pump w/Hose Storage + 3.5 x 4.5 mm Engine Oil Hose + Dust CoverThe Good News, Right now we're giving big as much as 85% for people who buy FIRSTINFO Upgraded Pneumatic/Manual 15 Liter Oil/Fluid Changer Vacuum Extractor Pump w/Hose Storage + 3.5 x 4.5 mm Engine Oil Hose + Dust Cover products through this Website.Not just that, you'll even get yourself a absolutely free discount in the event that you order today.Thanks for watching and please give a thumbs up.

----------------------------

Disclaimer:

This Website is participant in the amazon services llc associate program.I do use affiliate links when linking products in the Website description.This does not affect your buying experience or item price but does mean I receive a small commission on items purchased using such links.An affiliate advertising program designed to provide a means for sites to earn advertising fees by linking to website and amazon.comWe also participates in affiliate programs with other sites. We are compensated for referring traffic and business to other companies.

---------------------------